How To Choose Water Softener?

It is very difficult to choose the right water softener for your house or office. There are a lot of things that you have to take care of. This usually makes people confused and they find it hard to select the right one. There are many factors that you should consider. Here in this article, we will learn about some of the tips that you should keep in mind while looking for a water softener for overhead tanks. We will discuss all the points that are necessary and should not be overlooked.

How Hard Water Is Harmful?

Firstly, we should know why hard water is said to be harmful. It ultimately can become rather disruptive to everyday household tasks and create several problems for you. Some of the problems are:

  • It damages appliances and also the central heating system along with their efficiency
  • Cleaning becomes extremely difficult
  • Hard water causes a problem for people who have skin diseases such as eczema
  • Washing clothes is tough

Working Of Water Softener

Salt-based, ion exchange and other water softener types tackle different problems that are related to the limescale by removing the harmful minerals from the water before it can reach the water supply taps. A water softener is installed in the home where you get hard water. It is connected to the plumbing system that closes the incoming mains to make sure that all the parts of your home benefit from the softened water.

The ion exchange softeners extract magnesium and calcium ions that are found in the hard water with the harmless sodium ions. The softening process adds a very small amount of extra sodium to the supply of water. In most cases, it is safe to drink, but if you want to install a water filter it will reduce the amount of sodium in the water and will improve its taste.

Design Of Water Softener

Water softeners work on the principle of exchange. With time, research and development have greatly improved the system over the years. The manufacturers are improving the following thongs.

  • Safety and durability of the materials that are used
  • Better control mechanism
  • It helps to make sure that the flow of water is even with the resin bed
  • Optimum water contact time for the process of exchange
  • Cost efficiency and effectiveness of the process of regeneration

The modern softeners have resin beds along with a brine tank and controller which helps the softener to operate.

Methods To Control Water Softener

Time Controlled

The time-controlled softeners have a process of regeneration at specific intervals of time. This can be weekly or daily. This can become wasteful as:

  • The process of regeneration might occur after the resin has exhausted
  • This process might not happen faster which is why you will get hard water at the end.

Volume Controlled

The metered and volume-controlled softeners measure the amount of water that flows through the softener and then regenerate the resin beds that it will detect when they are exhausted.  For the meter-controlled water softener to calculate when the resin has been exhausted it needs to know the water hardness and also the amount of water that is used. Hence, a water softener is set to the exact hardness of the water that is going to be more efficient than the softener which uses the hardness range that is pre-set.

Electric Water Softener

You will get a water softener for an overhead tank that is electric. These are the most used softeners in the country today. The technology that is used in these softeners is used to record the usage of water and it controls the process of regeneration. The non-electric water softeners entirely rely on the pressure of water and measure the use of water along with the operation of valves.

Twin Vs Single Tank Softeners

The difference between the two types of softeners are as follows:

  • When you use a single tank, it offers you soft water on demand. The twin tank softens water 24/7
  • The single tanks electronic technology improves the efficiency but in the case of twin tank non-electronic
  • Single tank is like a simpler design with the less part whereas the twin tank has a complex design
  • Twin tanks usually fluctuate the flow of water during the process of regeneration but single tanks have even water flow
  • Tablets or granule salt is used in a single tank but in a twin tank block salt is used.

How To Choose Water Softener For Home?

Following are some of the points that you should keep in mind while looking for a water softener.

  • Check the amount of water and salt used for the regeneration process
  • Is the design right for your use and make sure whether it will help you turn a sufficient amount of hard water into soft water
  • Will the company you are choosing will provide you with a warranty
  • How much money do you have to invest?

Follow this guide to get the best water softener for your home.